Engraving Pen with 40 Bits,USB Rechargeable Engraver Pen with Insert Light,Mini Electric Engraving Machines Etching Pen Cordless Rotary Tool for DIY Jewelry Metal Wood Stone Glass

Price: $18.99
(as of Jun 21, 2024 08:34:16 UTC – Details)

Product Description

Portable Mini Engraver Pen with 40 Bits and 4 Stencils for You

Package Included:

1*Engraving pen;1*USB Power wire ;30* Diamond Bits; 2 * Drill Bit; 3 * Saw blades with Rod;5* Polishing Rotary Heads;1*Tungsten steel burr bit; 1*Plastic Head burr bit;4 * Stencils

How to install？ – Put the Shank of 2.35mm grinding head into the chuck-only need to insert the fixed bit, do not need to use tools to tighten.

Product parameters

Applicable grinding head shank diameter: 2.35mm ; Chuck depth: 25mm Speed: 5000-1000-2000r/min three gears; Power: 8-10W Use time: no-load continuous operation for more than 3 hours, if you need to use for a long time, you can use while charging. Battery voltage: 3.7v; Battery capacity: 500MA Charging: 30 minutes to 80% full, about 40 minutes to full.Note: You have to press the on/off button a quick short press for each of the speeds. The quick presses must be done in quick succession, since any delay in between will result in the device turning off instead of switching gears.About the replacement bits: It fits 2.35mm shank burrs,Easy to replace the rotary bit.

Multipurpose Rotary Tool Set

3 GEAR Adjustable Speed

3 position adjust rotation speed from 5000-20000 r/min to apply different situations.

Fast Full Charge

Using TYPE-C charging cable , 30 minutes to 80%, about 40 minutes full.

40pcs Various Grinding Bits and Tools

It can work on metal, glass, ceramic, leather, wood,jewelry,stone or statue.

Equiped with Led Light Design

The Engraving Pen built-in led light at the head can help you see the inside of the object to facilitate your grinding and carving

Overload Display

5. In the process of use, the load display will show the load status at any time according to the use condition6. Overload display, when the use load is too large, the overload display light will be on for 2 seconds and the system will stop for protection.7. According to the current use situation, users can grasp the load situation, please use within the overload range.

Operation method

1. Press the power button lightly once to enter the 1st gear working state, the speed is about 5000 rpm2. Press the power button again to enter the 2nd gear working state again, the speed is about 10000 rpm3. Press the power button again to enter the 3rd gear working state again, the speed is about 20,000 rpm4. Press the power button again to enter the shutdown state.
Nice and compact and easy to use. This is the perfect engraver for small jobs. Rechargeable and can be used while recharging. Convenient light at the tip for more detailed work. Stencils were included as well. A great little engraver. More quiet.

How to install the grinding head

Put the grinding head into the chuck-only need to insert the fixed bit, do not need to use tools to tighten.

Charging precautions

1. The power of the electric rotary tool is generally around 50% at the factory, and needs to be fully charged before first use. 2. The charging port is TYPE-C, which is the same as the charging port for Android smartphones. 3. Please use a standard USB charger or computer USB to charge the electric grinder. 4. Do not cover the item when charging to ensure good heat dissipation 5. Power display: 1 light = 30%, 2 lights = 31%-70%, 3 lights = 71%-100% 6. After fully charged, the electric grinder will automatically turn off the power and turn off the lights. 7. When not in use, it needs to be fully charged and placed and charged once every six months.Note: Your craft is more valuable, please pay attention to the use of the appropriate rotary grinding head and strength in the process, so as not to damage the craf.

[*Mini Hand Engraver with 40pcs Shank of 2.35mm Grinding Bits ] This set including: 1* Engraving Pen ,30*diamond bits , 5*polishing grinding head ,2*drilling bits, 2*burr bits 3*circular saw blades with 1 shank, 4 Stencils. These portable and compact engraver pen are convience to take anywhere you want and allow you enjoy relaxing hand drill jewelry making time. It can work on metal, glass, ceramic, leather, wood,jewelry,stone or statue.
[*Little Engraving Pen in 3 Gear Adjustable Speeds 5000-20000 r/min]: 3 position adjust rotation speed from 5000-20000 r/min to apply different situations. Press the button lightly once to enter the 1st gear working state, the speed is about 5000 rpm ,Press the power button again to enter the 2nd gear working state again, the speed is about 10000 rpm ,Press the button again to enter the 3rd gear working state again, the speed is about 20,000 rpm
[*The Tool Equiped with Led Light] The Engraving Pen built-in led light at the tip can help you see the inside of the object to facilitate your grinding and carving, so as to make the finished product artwork or jewelry more perfect. At the same time, the installation is very simple, only need to insert the fixed bit, do not need to use tools to tighten, improve your work efficiency.
[*Smart Overload Power-off Protection] Overload display, when the use load is too large, the overload display light will be on for 2 seconds and the system will stop for protection.According to the current use situation, you can grasp the load situation, please use within the overload range.
[*Cordless and USB Rechargable-Using TYPE-C Charging Cord] A Must Have engraver for your Small Project,Nice and compact and easy to use , great for polishing your parts to creating a piece of art. Pretty quiet while using. About Charge: Using TYPE-C charging cable , 30 minutes to 80%, about 40 minutes full. No-load continuous operation for more than 3 hours, if you need to use for a long time, you can use while charging.
[*Easy to install ] Put the Shank of 2.35mm grinding head into the chuck-only need to insert the fixed bit, do not need to use tools to tighten.