findmall 8-1/4 Flat Lathe Chuck Jaws for Finishing and Polishing Woodturning Bowl and Plate Bottoms
Price: $23.09
(as of May 28, 2025 01:11:01 UTC – Details)
Product Description
How to use
1. Take it the socket head cap screws and pry open the jaws on the chuck.
2. Clean the dust from the chuck track.
3. Install the jaws on the track and tighten the screws.
4. Adjust the pin position according to the diameter of the workpiece.
The 8-1/4 inch large flat claw is a large-diameter clamping claw for wooden rotating bowls, plates and other items.
Fit for use with “C” series chucks. It is matched with 2 sets of fastening nuts, which will not hurt the workpiece during clamping.
cast aluminum
Product – Includes (16) soft rubber gripper bumper pins in two lengths to securely hold your workpiece: (8) 1/2 and (8) 3/4; Pins have a 6mm thread; Also includes one Wrench.
Diameter – Grips workpieces from 2-3/4 to 8-1/4 diameter.
Material – Made from cast aluminum.
Positions – (7) positions for bowl rim placement.
Application – Ideal for finishing and polishing woodturning bowl and plate bottoms.
