Simple Woodturning Tools Carbide Lathe Turning Tool Set of 3 Full Size with 17″ Foam Grip Handles, USA Made

Price: $184.98
(as of Apr 26, 2022 15:05:20 UTC – Details)

Product Description

American Made Carbide Turning Tools for Wood

Full Size Set of 3 Tools with 3 Foam Grip Handles – 26.5″ overall length

The Simple Rougher carbide tool makes roughing much simpler & less physical as most of the shock created by interrupted cuts is absorbed in the tool rest instead of your hands & arms.The Simple Turner & Hollower is the simplest to use carbide tool on the market. You’ll appreciate the simplicity with which your project can be quickly turned & hollowed to the desired shape using this tool.The Simple 55 Detailer carbide tool that provides a much higher level of woodturning creativity.

CNC machined from ½” square stainless steel, making them stronger, stiffer and less likely to roll than round shaft tools. These full size tools feature an overall length of 12″, with a handle tang of ½” diameter x 2½” length. Once the tool is in the handle, the tool length is 9.5″, plus the handle length of 17″, gives you an overall length of 26.5″.

100% made in the USA by American craftsman. CNC machined from solid aluminum for balance, durability, and to last for years. Covered with a soft, comfortable foam rubber grip to reduce hand cramping during long turning sessions and for great tool control. Overall length is 17″; outside diameter is 1 3/8″; tool opening is ½” diameter. Tools can be easily changed by loosening the two stainless steel set screws.

Premium Quality Handles

Every handle is CNC machined from solid aluminum and then fitted with a comfortable, soft foam grip for great tool control.

100% USA made by American craftsmanCNC machined from solid aircraft aluminum for durability and balanceCovered with a soft, comfortable foam rubber grip for great tool control

Carbide Tipped Lathe Tools Machined from Stainless Steel

The Full Size Simple Turner and Hollower is the simplest to use turning and hollowing tool on the market today!

The Simple Turner & Hollower is the tool of choice to be used after a block has been roughed into a cylinder. Both beginners and experts alike appreciate the simplicity with which your project can be quickly turned and hollowed to the desired shape with this tool.

To use the Simple Turner and Hollower just follow these 3 simple steps.

Position the tool rest as close to the work as possible so the carbide cutter is at the lathe center line.Place the tool on the tool rest with the tool shaft parallel with the floor.While securely holding the tool slowly move the carbide cutter into the work.

As you turn and hollow your vessel with this tool you’ll quickly discover how simple it is to use. It won’t be long until it’s your favorite tool for doing 90 percent of the shaping work required on the inside and outside of most vessels.

The Full Size Simple Rougher carbide woodturning tool makes roughing much simpler and less physical.

When roughing with the Simple Rougher you’ll notice right away most of the shock created by interrupted cuts during roughing is absorbed in the tool rest instead of your hands and arms. As you begin to move the tool across the turning block you’ll see how fast these carbide tools cut and how much simpler roughing is. It won’t be long until your block is a cylinder and you’ll get your first look at what your turning will become.

In addition to roughing you’ll notice the Simple Rougher is a great tool for shaping the outside radius of a bowl and for turning beads on spindle turnings.

Straight line turning is also simplified on projects such as the wishing well seen in the photos of this tool. Also it’s a great tool for hollowing out the inside of a bowl. If you’re making a box or other vessel that requires square inside corners and a flat bottom this is the tool of choice for that as well.

The Full Size Simple 55 Detailer is a wonderful carbide woodturning tool that provides a much higher level of woodturning creativity.

The design of the Simple 55° Detailer lends itself perfectly to small intricate detail work such as turning beads, cover finials, boxes and other final details on spindle and bowl turnings. The special shape of the diamond cutter allows access to tight places where the cutter on other tools simply can’t be used. Also it is also very useful for making outside chuck tenons and reverse angle inside cuts so bowls can be chucked with dovetail jaws. If you use a 4 jaw chuck to hold your turnings this tool is a must and will be used on every turning.

As you use this tool you will soon see the wonderful small details that can added to your turnings. It will quickly become one of your favorite tools and used regularly.

Full Size Carbide Lathe Tools Technical Details

Simple Rougher (SR) Tool: Carbide cutter – 15mm x 15mm with corners rounded an approx radius of 0.02″ Simple Turner & Hollower (STH) Tool: Carbide cutter – 9/16” diameter – Flat top cutter Simple 55° Detailer (S55D) Tool: Carbide cutter – 55° Diamond Overall tool length – 12″ Tool Shaft – Solid steel ½” square solid stainless steelHandle tang – ½” diameter x 2½” length

Benefits of Carbide Simple Woodturning Tools

Simple to use for all skill levelsWoodturning is fast and more enjoyableYou can focus on your project and not on techniques or sharpeningNo long learning curveNo expensive sharpening equipmentBegin turning as soon as your box arrives!

Tool Engraving Helps Identify Cutter Selection

Each Simple Woodturning Tool is engraved so you know exactly what tool you have. That makes finding replacement cutters very simple!

Here’s how you would find them:

Authentic Simple Woodturning Tools – replacement cutter for Simple Rougher (fits tools engraved with SR)Authentic Simple Woodturning Tools – replacement cutter for Simple Turner & Hollower (fits tools engraved with STH)Authentic Simple Woodturning Tools – replacement cutter fits Full Size Simple 55° Detailer (tool engraved with S55D0

Note: These are FULL SIZE tools. Mid size tools have the letter M preceding (for example MSTH) and those cutters will not fit these full size tools.

American Made Set of 3 Full Size Carbide Lathe Turning Tools with Color Coded Handles: Hollower, Detailer & Rougher
17″ long solid aluminum foam grip tool handles are color coded for easy tool identification. Overall tool & handle length is 26.5″.
This set of carbide lathe tools is ideal for turners at any skill level. With carbide it’s all turning and no sharpening so you can begin turning immediately.
Each lathe tool is 1/2″ square CNC machined by Harrison Specialties in Ramsey, Minnesota. These tools are designed to be kept flat on the tool rest and parallel with the floor.
Each lathe tool features a carbide tip with multiple sharp edges that can be rotated several times. A Torx star wrench is included.