On the Horizon for 2026

The DOMINO system makes wood joints that hold tight and last. Its special cutting motion creates twist-proof holes that fit DOMINO Tenons perfectly. DOMINO Tenons lock in like a mortiseand-
tenon, with the adjustability of biscuits and the strength of dowels. That means perfect alignment and solid hold—great for cabinets, tables, and even outdoor builds. Learn more at festoolusa.com.

Frustrated by spending time building jigs instead of finishing projects? Woodpeckers Joinery Sled is just what you need. It replaces dozens of shopmade jigs and adds silky-smooth micro-adjustment. The patented leaf spring miter bar adjusts for a perfect fit in poorly machined or time-worn miter slots that are nominally 33⁄88 in. by 33⁄44 in. Perhaps best of all, it isn’t just a table-saw jig and it isn’t just a router-table jig. It’s both! Visit woodpeck.com for more information.

For decades, woodworkers have been forced to finish projects with shop rags that were never designed to release what they soak up. The result? Oversaturated rags, drips, wasted finish, and lint left behind on the workpiece.
The MāKRS Stain Pad Original was designed specifically for wood finishing. Its patented foam-core design delivers controlled release of finish during application for smoother, more consistent results with fewer drips, greater control, and less waste. The loop-less microfiber applies even coats without lint or snags, while the cut-to-size design gives you precision control for trim, corners, and detailed work.
Visit makrs.tools and use coupon code WOODWORKER26 for 15% off.

Break down large sheets with confidence in the shop or on the jobsite. The RipSawGuide fits sidewinder and worm-drive circular saws from 511⁄22 in. to 711⁄44 in., securing your saw at four points of contact with a built-in rubber grip. All-metal construction minimizes flex for straighter, more accurate cuts. The adjustable edge guide reaches up to 24 in., and laser-etched micro-adjust scales in 11⁄1616-in. increments make dialing in your cut simple. To learn more, visit milescraft.com.

Sutherland Welles, Ltd., has been handcrafting exceptional polymerized tung oil wood finishes since 1965. Using only the highest-quality raw materials, including American-grown tung oil, we polymerize our oils in our Providence, R.I., facility to create traditional finishes designed for the contemporary woodworker.
VOC-exempt, GREENGUARD Gold–certified, and compliant in all 50 states, our finishes are both environmentally conscious and finisher-friendly while delivering lasting beauty, depth, and durability. Learn more at sutherlandwelles.com.

“Made in USA” means old-fashioned quality.
It means parts and accessories on the shelf, ready when you need them. It means people on the other end of the phone who build and run the machines you’re asking about. Woodmaster’s unique combo of big-company muscle and small-company attitude is simply unavailable from companies importing overseas machines.
Woodmaster has been making planers, molders, and drum sanders since 1983. To learn more, call 800-821-6651 or visit woodmastertools.com.

Order the latest catalog today from Woodline USA—your trusted source for premium carbide router bits, shaper cutters, sawblades, CNC tooling, and woodworking accessories. Professional-quality products, expert support, and fast ordering are just a click away at woodline.com. Or call 800-472-6950.

Featured in Fine Woodworking’s “Timeline of Tool Innovation,” the PantoRouter® is a leap forward for woodworkers from novice to professional. Discover the PantoRouter advantage:

• Ease of use—create precise mortise-and-tenon joints, box joints, and dovetails in minutes
• Efficient—streamline with a single tool, saving time so you can focus on design creativity
• Accurate—specialized templates and guides for exact cuts
• Safe—features that protect users from hazards, making it ideal for the classroom

The PantoRouter is a revolution in woodworking. To learn more, visit pantorouter.com.

Create a spherical wooden bowl or ball without a lathe using the Arbortech SpheroPlane. This tool attaches to your angle grinder and features an adjustable carving radius, allowing you to create projects both large and small. Transform a rough piece of wood into a finished masterpiece easily with the included Sanding System. A must-have in your woodworking arsenal, the SpheroPlane turns every project into a ball of fun!

For more information, visit arbortechtools.com.

Stable, flat, easy to clean. Hap Stanley designs precision advanced abrasives for epic edge creation in modern steels. Nano Hone abrasives cut the hardest steels and leave beautiful polishes on your hand tools. Visit nanohone.com to learn more.

The Orion 950 Smart Pinless Wood Moisture Meter Kit is the all-in-one solution for busy professionals desiring superior accuracy and multi-tool functionality. The Orion 950 features an on-board equilibrium moisture content (EMC) calculator, Bluetooth connectivity to free smart-device apps, built-in temperature/RH sensor, and more. To learn more, go to wagnermeters.com.

Now celebrating its 100th anniversary, Charles G. G. Schmidt & Co. makes custom and standard profiled knives for woodworking machines of all types. Schmidt can make knives to duplicate any profile, and these knives are ground on the most sophisticated grinding machines. Schmidt can also manufacture other heads and cutters for woodworking companies of all sizes; custom router bits are a specialty. From one profile to hundreds, Schmidt has the capacity to deliver.
Call us at 800-SCHMIDT, and visit cggschmidt.com to download our new 100-year-anniversary catalog.

The Grex GC9032 cordless stapler provides pneumatic-level
power and balance in a lightweight, compact frame. Optimized for precision, it features a long narrow nose for tight access and a multi-angle safety. An integrated rail system and nose-guide mounting points support versatile attachments, including an adjustable edge guide, a flashlight, and a dual-sided guide for centering staples on ½-in. and ¾-in. panels. More attachments will be introduced to adapt to more applications and trades.
To learn more, contact us at 323-318-2828 or [email protected].

Nordfab Quick-Fit® ducting is the gold standard for woodshop dust collection, offering professional-grade efficiency for both high-volume industrial facilities and serious enthusiast workshops. Our signature clamp-together design eliminates rivets, screws, and welding, cutting installation time by 45%.
The smooth interior reduces friction loss, ensuring maximum suction to keep your workspace pristine. Durable, modular, and easy to reconfigure, Nordfab grows with your shop.
To learn more, call 800-532-0830, visit nordfab.com, or send an email to [email protected].

The new 10080 benchtop jointer includes features typically found on Oliver’s floor-standing jointers—features like an HCX helical cutterhead, cast-iron fence and tables, a 2-hp universal motor, and a built-in chip-evacuation blower. These features, in addition to Oliver’s well-known build quality and long service life, make the new 10080 a standout in the benchtop jointer space that really has no competition. Learn more at olivermachinery.net.

The ShopBot Carolina Series ATC—our most affordable full-size ATC yet—delivers automatic tool changing for the small shop. Seamless bit changes mean complex work—3D textures, lettering, multi-step cuts—flows without interrupting your production process. The Carolina Series ATC is available in 1-hp and 3-hp configurations. Serious ATC capability is finally within reach. For more information about the Carolina Series ATC, call us at 888-680-4466 or visit shopbottools.com.