Adjustable MarginsAluminum Alloy MaterialAccurate PositioningEasy OperationAdapt to Boards of Different Thicknesses
35mm drill bit*12mm drill bit*1open end wrench*2limit ring*1hex key*1hinge hole drilling guide*1
Precautions for Use
1. The limit ring should be fixed close to the step of the tool handle, otherwise the depth of the hole will be insufficient
2. When clamping, confirm that the backing is close to the side of the panel, and the indenter presses the panel
3. When opening the hole, make sure that the electric drill rotates in the forward direction, and the reverse rotation cannot open the hole
4. Before opening the hole, let the electric drill rotate at a high speed, and then force it down vertically and evenly.
【Adjustable Margins】 Connect the holes with the same numbers on the tool holder and the main body with bolts, and the margins can be set to 3-4-5-6-7mm respectively. For example, if you want a 5mm margin, just screw the two numbers ‘5’ together.
【Applicable to 15-25mm Boards】 press the handle down, the clamping is fast and stable, and the thickness of the splint can be 15-25mm.
【Sharp punching】 Carbide drill bit, fast and burr-free sharp cutting head can cut hard wood board.
【Wide Range of Applications】 35mm hinge clamps are widely used in hinge installation, cabinet door hinge drilling positions, woodworking hole aids, suitable for most common hinges, allowing you to easily install many cabinet doors.
【Product List】 35mm drill bit*1, 2mm drill bit*1, open end wrench*2, limit ring*1, hex key*1, hinge hole drilling guide*1.